Resetter Canon IP 3300

Canon IP 3300 Manual resetter

EERPSOM Reset Procedure

Try to enter service mode and reset EEPROM:

1. Start with the printer OFF
2. Hold down RESUME and then hold down POWER
3. release RESUME
4. press RESUME twice, then release POWER
5. Let green light blink until printer is done moving print head.

Now you should be in service mode.

6. Press RESUME 1 time then POWER to execute the command
This will print head test print. Just if you want to check clogging problems in depth.

7.Press RESUME 2 times then POWER to execute the command
This will print EEPROM information ink usage etc.

8. Press RESUME 3 times then POWER to execute the command
This will reinitialize (reset) EEPROM

9. Press RESUME 2 times then POWER to execute the command
This will print EEPROM information once more, you should compare it with your fist print. All zeroes should be all over the place.
That means your EEPROM is reset.

Use with your own risk

Socializer Widget

SOCIALIZE IT →

Tweet

FOLLOW US →

SHARE IT →